1. Taskforce Support
  2. Property Maintenance Tips

Electrical Hot Water Issues

Water too Hot!
One of the most common issues is that your water is either too hot or, conversely, far too cold. If this is happening to you, it's possible that your heater's thermostat is set too high or too low, depending on your circumstances. Check your heater's temperature dial to see if it needs to be adjusted to get your water back to the right temperature for you.
No Water
If you discover that you don't have any water at all, this usually means that something is slowing or stopping the flow of water into your home. This could be due to a buildup of calcium or sediment, or it could be due to a rusted section of your plumbing. Alternatively, if your system has a leak, it can obstruct the flow of water through the pipes. Examine your system for any unnecessary water pooling, as well as any water dripping or leaking from other areas of the house that could indicate a leak.
Weird Noises
Because metal expands and contracts as it heats and cools, your hot water system will make some strange noises from time to time as your water passes through the pipes. However, if your heater is making a 'boiling' noise, you should call us immediately because this could indicate overheating and pressure buildup, which can be dangerous if not addressed promptly and properly.
If your system is making popping or hissing noises, hard water sediment or scale may have built up somewhere. If your heater is making any noises that you aren't sure about or that you think are alarming, give us a call right away. It gives you peace of mind because you know your system is working properly.
Your water heater is leaking large amounts of water at random times.
If your relief valve is leaking large amounts of water regularly, your heaters are probably too hot. The relief valve is designed to relieve any pressure that builds up in hot water systems over time, so if yours is spouting large amounts of water at irregular intervals, the temperature is probably too high for it to handle.
The hot water is smelly, rusty, or dirty
Corrosion of the anode rod or the tank itself is one of the most common causes of dirty, smelly, or rusty water. When it comes to water with a bad odor, this can indicate a bacteria buildup, and it may be time to raise the temperature of your heater (to kill bacteria) or flush out your system.
Not enough hot water
There are several reasons why you may not be getting enough hot water, including:
  1. The temperature dial on your heater isn't set correctly.
  2. If the temperature outside has dropped significantly, your system may have to work much harder than usual to get hot water to you.
  3. If you're using a lot more hot water than usual, it's possible that your system isn't keeping up with your demands. This can happen if you have changed your showerheads or installed a bath, both of which use more water. If this is the case, a larger storage tank or a tankless system may be necessary.